Albert Browne Singapore | Horiba Singapore | Polysciences Singapore | Duchefa Biochemie Singapore | SSIbio Singapore | Atago Singapore | Enzo Life Sciences Singapore | Medicom Singapore | Vacuubrand Singapore | Axxora Singapore | Excel Scientific Singapore | Medline Singapore | Medical Products Online Store | Scientific Products Online Store

    Product     Excel Scientific

Excel Scientific

Sort by:

AbsorbMax™

View More

AeraSeal™

View More

AeraSeal™ SealMate™ Rolls

View More

AeraSeal™ SealMate™ Starter Kit, SealMate Dispenser + 2 Rolls of AeraSeal

View More

AlumaSeal® II

View More

BrightMax White Sealing Films, Non-Sterile

View More

eXTReme™ Seal

View More

eXTReme™ Seal, Large

View More

EZcap™ FoilStrips™

View More

EZcap™ General Purpose FilmStrips™

View More

EZcap™ PCR FilmStrips™

View More

Film-Sealing Paddle

View More

FoilSeal™ RollMate™, Dispenser +1 Roll of FoilSeal™ Film

View More

FoilSeal™, Chemically Resistant

View More

General Purpose Film

View More

Reagent Reservoir with Lid

View More

Roll Stock for Automation, AeraSeal™

View More

Roll Stock for Automation, AlumaSeal®

View More

Roll Stock for Automation, ThermalSeal® RTS

View More

SealPlate® ColorTab™

View More

SealPlate® RollMate™, Dispenser +1 Roll of SealPlate Film

View More

SealPlate® SealMate™ Rolls

View More

SealPlate® SealMate™ Starter Kit, SealMate Dispenser + 2 Rolls of SealPlate® Film

View More

Soft Rubber Roller

View More
AbsorbMax™

Description

AbsorbMaxTM sealing films are 203 µm thick black vinyl films with 37 µm acrylic adhesive for use with 96-well, 384-well, and 1536-well black microplates. The sealing films may be applied to either the top or bottom of the plate. A split backing aids in applying the sealing film properly. Edge cutouts assist in positioning and accomodate ribs on the plate bottom. The light-blocking and absorbing properties of AbsorbMax sealing films make them ideal for protecting light-sensitive samples during storage. In fluorescence applications they reduce stray light and well-to-well crosstalk. For top-reading fluorescence applications, apply the black sealing film to the plate bottom with clear-bottom wells. For bottom-reading fluorescence, use the black sealing film as a top seal. Dimensions: 76.2 by 114.3 mm. AbsorbMax sealing films will fit within the rim of raised-rim plates. Recommended temperature range: -40 °C to +80 °C.

RM 110.00

 

AeraSeal™

Description

A 140 µm thick hydrophobic porous rayon sealing film including medical-grade adhesive for tissue culture plates, bio-blocks, and 96-well plates where gas exchange is necessary for cell or bacterial growth. AeraSeal sealing films minimize cross-contamination, spillage and evaporation. They allow uniform air and CO2 exchange for all wells, unlike plate lids which favor exchange for wells near the plate edges.

RM 120.00

 

AeraSeal™ SealMate™ Rolls

Description

Each AeraSeal roll contains films to cover 50 culture plates.

RM 190.00

 

AeraSeal™ SealMate™ Starter Kit, SealMate Dispenser + 2 Rolls of AeraSeal

Description

Excel Scientific's unique SealMate™ system provides a convenient new method for sealing standard-format microplates with adhesive films. The system includes a molded polypropylene dispenser with a hinged “clamshell” design and sealing films supplied in a novel sheeted-roll configuration.

RM 220.00

 

AlumaSeal® II

Description

A 36 µm soft non-permeable aluminum foil sealing film with 28 µm layer of strong medical-grade acrylic adhesive, AlumasSeal IITM sealing films eliminate the need for heat-sealing devices or mats during thermal cycling. Each sealing film measures 82.6 x 146.1 mm and offers sufficient sealing area for all PCR plates. Length between the perforations with end tabs removed is 125.4 mm. Compared to other aluminum foils, AlumaSeal II has less tendency to roll back or itself when removing the backing paper and conforms well to the plate during application

RM 110.00

 

BrightMax White Sealing Films, Non-Sterile

Description

BrightMaxTM sealing films are 203 µm thick white vinyl films with 37 µm acrylic adhesive for use with white microplates. The sealing films may be applied to either the top or bottom of the plate. A split backing aids in applying the sealing film properly. The light-reflective properties of BrightMax plate-sealing films on clear-bottom plates maximize sensitivity of bioluminescence and chemiluminscence assays in bottom-reading luminometers. White films also have application as a backing matrix for microscopy of punchout samples from filter plates, for example in ELISPOT assays. Dimensions are 76.2 by 116.0 mm with no end tabs. A backing split singly on the long dimension aids in applying film to plates. Recommended temperature range: -40 °C to +80 °C.

RM 110.00

 

eXTReme™ Seal

Description

XTR films offer high performance under extreme conditions. A 2mil polyester film with a 1.65mil layer of strong acrylic adhesive. eXTReme Seal films remove cleanly from plate surfaces without adhesive stringing, residue or contamination. Each sealing films measures 78.3 x 140.5mm and offers sufficient sealing area for all plate types (e.g. flat top and raised-rim). Chamfered corners result in no plate overhang for robotics applications. Features two end-tabs with perforations. Length between perforations with end tabs removed is 119mm.

RM 120.00

 

eXTReme™ Seal, Large

Description

Large cut is designed for greater coverage; results in a more complete seal around the edges of the plate which can reduce evaporation rates. Large cut allows for easier positioning of the film to the plate via edge of plate alignment vs. centering. 2mil clear polyester film will not tear upon removal. An extra strong, thick adhesive minimizes evaporation and well-to-well contamination. Removes easily and cleanly from plate surfaces. Features two removable end-tabs with perforations for ease of handling, application and removal.

RM 120.00

 

EZcap™ FoilStrips™

Description

Ideal for standard PCR, storage (DMSO resistant), light sensitive assays and robotics. An economical and more user-friendly alternative to strip-caps; no sore thumbs and fingers guaranteed! Precision cut to a smaller dimension to seal a single 8-well row of a 96-well plate or a single PCR 8-tube strip. Each sheet contains 6 FoilStrips on a continuous backing liner for ease of use. Strips can be used to selectively cover individual plate rows to prevent accidental pipetting or to re-seal rows that have been pierced. Certified DNase- & RNase- free. Excellent chemical resistance (e.g. DMSO). 2.0mil aluminum minimizes shredding during removal. Conformable foil allows visual verification of seal security around each well. Pierceable with a pipet tip or robotic probe for direct sample recovery. Specially formulated adhesive provides an excellent seal to minimize evaporation, reduce cross-contamination and prevent spillage. FoilStrips remove easily and cleanly from plate surfaces with no splash back as can occur with strip-caps. Features two end-tabs with perforations for ease of handling, application and removal. A non-locking workstation is recommended for sample prep (e.g. 96 round-well PCR plate or deep well block). Removal of the end-tabs at the perforations is recommended before cycling. Do not fold foil around sides of tubes. A final sealing step is highly recommended in the thermal cycler because 8-tube strips flex during handling.

RM 100.00

 

EZcap™ General Purpose FilmStrips™

Description

Ideal for ELISA, Incubation and General Use. Certified DNase- & RNase- free. Designed to be used with both polystyrene and polypropylene plates. Precision cut to a smaller dimension to seal a single 8-well row of a 96-well plate or an ELISA strip-well plate. Each sheet contains 8 FilmStrips on a continuous backing liner for ease of use. FilmStrips can be peeled and applied individually or two-at-a-time for increased efficiency. FilmStrips can be used to selectively cover one row of a plate to prevent accidental pipetting or to re-seal rows that have been pierced. 2.0mil polypropylene film features good clarity and easy handling. Specially formulated adhesive provides an excellent seal to minimize evaporation, reduce cross-contamination and prevent spillage. Removes easily and cleanly from plate surfaces Minimizes aerosols upon film removal. Features two end-tabs with perforations for ease of handling, application and removal.

RM 90.00

 

EZcap™ PCR FilmStrips™

Description

Ideal for PCR, qPCR (real-time) and storage. An economical and more user-friendly alternative to strip-caps; no more sore thumbs and fingers guaranteed! Precision cut to a smaller dimension to seal one 8-well row of a 96-well plate or a single PCR 8-tube strip. Each sheet contains 8 FilmStrips on a continuous backing liner for ease of use. Strips can be peeled individually or two-at-a-time for increased efficiency. Strips can be used to selectively cover one row of a plate to prevent accidental pipetting or to re-seal rows that have been pierced. Certified DNase- & RNase- free. 2.0mil clear polyester film. Specially formulated adhesive provides an excellent seal to minimize evaporation, reduce cross-contamination and prevent spillage. FilmStrips remove easily and cleanly with no splash back as can occur with strip-caps. Features two removable end-tabs with perforations for ease of handling, application and removal. A non-locking workstation is recommended for sample prep (e.g. 96 round-well PCR plate or deep well block). Removal of the end-tabs at the perforations is recommended before cycling. A final sealing step is highly recommended in the thermal cycler because 8-tube strips flex during handling.

RM 120.00

 

Film-Sealing Paddle

Description

RM 80.00

 

FoilSeal™ RollMate™, Dispenser +1 Roll of FoilSeal™ Film

Description

Ideal for ELISA, incubation and general use. An economical, efficient way to rapidly seal microplates; faster than applying single sheeted film. Self-standing, non-slip supports hold pre-scored film roll securely in place for quick and easy dispensing. Continuous backing liner can be torn off or fed directly into a waste basket for disposal. Roll tension can be easily adjusted to user preference (e.g. loose, tight). SealPlate film minimizes evaporation, reduces cross-contamination and prevents spillage. 2.0mil rigid polyester film features good clarity and easy handling. Eliminates the “edge effect”, excess evaporation in the outside wells, which can occur with other films and plate lids. Useful as a simple cover to protect samples from external contamination, dust and debris. High integrity packaging prevents damage during transit; poly bag eliminates dust and particulate contamination.

RM 500.00

 

FoilSeal™, Chemically Resistant

Description

Ideal for standard PCR, long-term storage, light sensitive assays and robotics. Certified DNase- & RNase- free. Excellent chemical resistance (e.g. DMSO). Universal fit for use with all plate types (e.g. flat-top and raised-rim). The smaller dimensions and rounded corners result in no plate overhang for robotics applications. 2.0mil aluminum minimizes shredding during removal; ideal for cold storage. Conformable foil allows visual verification of seal security around each well. Pierceable with a pipet tip or robotic probe for direct sample recovery. Specially formulated adhesive provides an excellent seal to minimize evaporation, reduce cross-contamination and prevent spillage Removes easily and cleanly from plate surfaces. Features a single end-tab with perforations for ease of handling, application and removal.

RM 120.00

 

General Purpose Film

Description

Ideal for ELISA, Incubation and General Use. Certified DNase- & RNase- free. Designed to be used with both polystyrene and polypropylene plates. 2.0mil clear polypropylene film features good clarity and easy handling. Specially formulated adhesive provides an excellent seal to minimize evaporation, reduce cross-contamination and prevent spillage. Removes easily and cleanly from plate surfaces. Minimizes aerosols upon film removal. Features two end-tabs with perforations for ease of handling, application and removal.

RM 110.00

 

Reagent Reservoir with Lid

Description

Texan reagent reservoirs are reusable -- an environmentally sound alternative to disposable reagent reservoirs. Their extra-large capacity means fewer refills and time saved. The V-shaped basin is compatible with both eight- and twelve-place multiple pipettors with minimal reagent waste. Lids are removable -- attached with ball and socket hinges -- and latch tightly for secure storage of left-over reagents. With lids closed, Texan reagent reservoirs are stackable. A perimeter ridge on the lid prevents sliding. Construction is clear, chemical-resistant, autoclavable polypropylene. Molded graduation marks provide volume indication at 25, 50, 75, 100, 125, and 150 ml.

RM 90.00

 

Roll Stock for Automation, AeraSeal™

Description

Excel Scientific now offers adhesive sealing films on Roll-Seal™ rolls for use with high-throughput automated microplate sealers. Film rolls, constructed on three-inch-diameter plastic cores, are compatible with most common adhesive sealers (Brandel, Thermo-Fisher/Abgene, FluidX, KBiosystems). The Roll-Seal format provides reliable and efficient sealing at a lower cost per plate with minimal user intervention. Robust static-free packaging provides protection during shipment and facilitates accurate alignment and adhesion. Roll-Seal adhesive seals are currently available in three sealing materials: • ThermalSeal RTS™ high-vapor-barrier, clear polyolefin with ultra-strong pressure-sensitive silicone adhesive for qPCR, sitting-drop protein crystallization, HTS, storage and general incubation applications • AlumaSeal® pierceable aluminum foil with pressure-sensitive acrylic adhesive for PCR, HTS and cold storage • AeraSeal™ breathable rayon films for cell and tissue culture

RM 770.00

 

Roll Stock for Automation, AlumaSeal®

Description

Excel Scientific now offers adhesive sealing films on Roll-Seal™ rolls for use with high-throughput automated microplate sealers. Film rolls, constructed on three-inch-diameter plastic cores, are compatible with most common adhesive sealers (Brandel, Thermo-Fisher/Abgene, FluidX, KBiosystems). The Roll-Seal format provides reliable and efficient sealing at a lower cost per plate with minimal user intervention. Robust static-free packaging provides protection during shipment and facilitates accurate alignment and adhesion. Roll-Seal adhesive seals are currently available in three sealing materials: • ThermalSeal RTS™ high-vapor-barrier, clear polyolefin with ultra-strong pressure-sensitive silicone adhesive for qPCR, sitting-drop protein crystallization, HTS, storage and general incubation applications • AlumaSeal® pierceable aluminum foil with pressure-sensitive acrylic adhesive for PCR, HTS and cold storage • AeraSeal™ breathable rayon films for cell and tissue culture

RM 680.00

 

Roll Stock for Automation, ThermalSeal® RTS

Description

Excel Scientific now offers adhesive sealing films on Roll-Seal™ rolls for use with high-throughput automated microplate sealers. Film rolls, constructed on three-inch-diameter plastic cores, are compatible with most common adhesive sealers (Brandel, Thermo-Fisher/Abgene, FluidX, KBiosystems). The Roll-Seal format provides reliable and efficient sealing at a lower cost per plate with minimal user intervention. Robust static-free packaging provides protection during shipment and facilitates accurate alignment and adhesion. Roll-Seal adhesive seals are currently available in three sealing materials: • ThermalSeal RTS™ high-vapor-barrier, clear polyolefin with ultra-strong pressure-sensitive silicone adhesive for qPCR, sitting-drop protein crystallization, HTS, storage and general incubation applications • AlumaSeal® pierceable aluminum foil with pressure-sensitive acrylic adhesive for PCR, HTS and cold storage • AeraSeal™ breathable rayon films for cell and tissue culture

RM 1,010.00

 

SealPlate® ColorTab™

Description

SealPlate® ColorTabTM adhesive sealing films consist of 50 µm thickness clear polyester. They minimize evaporation, prevent spillage and contamination between wells, and provide a secure seal for ELISA, EIA, and similar assays. These unique sealing films include a color dot and white writing area on each end tab for plate ID labeling. End tabs with backing removed adhere to the ends of the plate and are perforated so they can be left in place to maintain plate identity even if the center portion of the sealing film is removed.

RM 130.00

 

SealPlate® RollMate™, Dispenser +1 Roll of SealPlate Film

Description

Ideal for ELISA, incubation and general use. An economical, efficient way to rapidly seal microplates; faster than applying single sheeted film. Self-standing, non-slip supports hold pre-scored film roll securely in place for quick and easy dispensing. Continuous backing liner can be torn off or fed directly into a waste basket for disposal. Roll tension can be easily adjusted to user preference (e.g. loose, tight). SealPlate film minimizes evaporation, reduces cross-contamination and prevents spillage. 2.0mil rigid polyester film features good clarity and easy handling. Eliminates the “edge effect”, excess evaporation in the outside wells, which can occur with other films and plate lids. Useful as a simple cover to protect samples from external contamination, dust and debris. High integrity packaging prevents damage during transit; poly bag eliminates dust and particulate contamination.

RM 300.00

 

SealPlate® SealMate™ Rolls

Description

Each SealPlate roll contains films to cover 100 microplates.

RM 160.00

 

SealPlate® SealMate™ Starter Kit, SealMate Dispenser + 2 Rolls of SealPlate® Film

Description

Excel Scientific's unique SealMate™ system provides a convenient new method for sealing standard-format microplates with adhesive films. The system includes a molded polypropylene dispenser with a hinged “clamshell” design and sealing films supplied in a novel sheeted-roll configuration.

RM 180.00

 

Soft Rubber Roller

Description

RM 100.00