- Universal fit for use with all plate types (e.g. flat top and raised-rim) - The smaller dimensions and chamfered corners result in no plate overhang for robotics applications - Two end-tab feature allows for ease of placement of film to plate - Certified DNase- and RNase- free - Excellent seal minimizes sample evaporation and reduces well-to-well cross contamination - Specially formulated adhesive provides an excellent seal for all plate materials, including polycarbonate - 2mil polyester film will remove cleanly from plate surfaces with no adhesive stringing or residue and will not tear upon removal - Length between perforations with end tabs removed is 119mm
Ideal for ELISA, Incubation and General Use. Certified DNase- & RNase- free. Designed to be used with both polystyrene and polypropylene plates. Precision cut to a smaller dimension to seal a single 8-well row of a 96-well plate or an ELISA strip-well plate. Each sheet contains 8 FilmStrips on a continuous backing liner for ease of use. FilmStrips can be peeled and applied individually or two-at-a-time for increased efficiency. FilmStrips can be used to selectively cover one row of a plate to prevent accidental pipetting or to re-seal rows that have been pierced. 2.0mil polypropylene film features good clarity and easy handling. Specially formulated adhesive provides an excellent seal to minimize evaporation, reduce cross-contamination and prevent spillage. Removes easily and cleanly from plate surfaces Minimizes aerosols upon film removal. Features two end-tabs with perforations for ease of handling, application and removal.
Texan reagent reservoirs are reusable -- an environmentally sound alternative to disposable reagent reservoirs. Their extra-large capacity means fewer refills and time saved. The V-shaped basin is compatible with both eight- and twelve-place multiple pipettors with minimal reagent waste. Lids are removable -- attached with ball and socket hinges -- and latch tightly for secure storage of left-over reagents. With lids closed, Texan reagent reservoirs are stackable. A perimeter ridge on the lid prevents sliding. Construction is clear, chemical-resistant, autoclavable polypropylene. Molded graduation marks provide volume indication at 25, 50, 75, 100, 125, and 150 ml.
Ideal for standard PCR, storage (DMSO resistant), light sensitive assays and robotics. An economical and more user-friendly alternative to strip-caps; no sore thumbs and fingers guaranteed! Precision cut to a smaller dimension to seal a single 8-well row of a 96-well plate or a single PCR 8-tube strip. Each sheet contains 6 FoilStrips on a continuous backing liner for ease of use. Strips can be used to selectively cover individual plate rows to prevent accidental pipetting or to re-seal rows that have been pierced. Certified DNase- & RNase- free. Excellent chemical resistance (e.g. DMSO). 2.0mil aluminum minimizes shredding during removal. Conformable foil allows visual verification of seal security around each well. Pierceable with a pipet tip or robotic probe for direct sample recovery. Specially formulated adhesive provides an excellent seal to minimize evaporation, reduce cross-contamination and prevent spillage. FoilStrips remove easily and cleanly from plate surfaces with no splash back as can occur with strip-caps. Features two end-tabs with perforations for ease of handling, application and removal. A non-locking workstation is recommended for sample prep (e.g. 96 round-well PCR plate or deep well block). Removal of the end-tabs at the perforations is recommended before cycling. Do not fold foil around sides of tubes. A final sealing step is highly recommended in the thermal cycler because 8-tube strips flex during handling.
- "Brilliant" Ultra-high Optical Clarity - Heat resistant, recommended for temperatures from - -40°C to +120°C - Certified DNase-, RNase-, and Nucleic-acid-free - Length between the perforations with end tabs removed is 121.9 mm - Dimensions are 79.4 by 142.9 mm for sealing PCR plates
BrightMaxTM sealing films are 203 µm thick white vinyl films with 37 µm acrylic adhesive for use with white microplates. The sealing films may be applied to either the top or bottom of the plate. A split backing aids in applying the sealing film properly. The light-reflective properties of BrightMax plate-sealing films on clear-bottom plates maximize sensitivity of bioluminescence and chemiluminscence assays in bottom-reading luminometers. White films also have application as a backing matrix for microscopy of punchout samples from filter plates, for example in ELISPOT assays. Dimensions are 76.2 by 116.0 mm with no end tabs. A backing split singly on the long dimension aids in applying film to plates. Recommended temperature range: -40 °C to +80 °C.
Ideal for ELISA, Incubation and General Use. Certified DNase- & RNase- free. Designed to be used with both polystyrene and polypropylene plates. 2.0mil clear polypropylene film features good clarity and easy handling. Specially formulated adhesive provides an excellent seal to minimize evaporation, reduce cross-contamination and prevent spillage. Removes easily and cleanly from plate surfaces. Minimizes aerosols upon film removal. Features two end-tabs with perforations for ease of handling, application and removal.
A 36 µm soft non-permeable aluminum foil sealing film with 28 µm layer of strong medical-grade acrylic adhesive, AlumasSeal IITM sealing films eliminate the need for heat-sealing devices or mats during thermal cycling. Each sealing film measures 82.6 x 146.1 mm and offers sufficient sealing area for all PCR plates. Length between the perforations with end tabs removed is 125.4 mm. Compared to other aluminum foils, AlumaSeal II has less tendency to roll back or itself when removing the backing paper and conforms well to the plate during application
AbsorbMaxTM sealing films are 203 µm thick black vinyl films with 37 µm acrylic adhesive for use with 96-well, 384-well, and 1536-well black microplates. The sealing films may be applied to either the top or bottom of the plate. A split backing aids in applying the sealing film properly. Edge cutouts assist in positioning and accomodate ribs on the plate bottom. The light-blocking and absorbing properties of AbsorbMax sealing films make them ideal for protecting light-sensitive samples during storage. In fluorescence applications they reduce stray light and well-to-well crosstalk. For top-reading fluorescence applications, apply the black sealing film to the plate bottom with clear-bottom wells. For bottom-reading fluorescence, use the black sealing film as a top seal. Dimensions: 76.2 by 114.3 mm. AbsorbMax sealing films will fit within the rim of raised-rim plates. Recommended temperature range: -40 °C to +80 °C.
Ideal for PCR, qPCR (real-time) and storage. An economical and more user-friendly alternative to strip-caps; no more sore thumbs and fingers guaranteed! Precision cut to a smaller dimension to seal one 8-well row of a 96-well plate or a single PCR 8-tube strip. Each sheet contains 8 FilmStrips on a continuous backing liner for ease of use. Strips can be peeled individually or two-at-a-time for increased efficiency. Strips can be used to selectively cover one row of a plate to prevent accidental pipetting or to re-seal rows that have been pierced. Certified DNase- & RNase- free. 2.0mil clear polyester film. Specially formulated adhesive provides an excellent seal to minimize evaporation, reduce cross-contamination and prevent spillage. FilmStrips remove easily and cleanly with no splash back as can occur with strip-caps. Features two removable end-tabs with perforations for ease of handling, application and removal. A non-locking workstation is recommended for sample prep (e.g. 96 round-well PCR plate or deep well block). Removal of the end-tabs at the perforations is recommended before cycling. A final sealing step is highly recommended in the thermal cycler because 8-tube strips flex during handling.
Ideal for standard PCR, long-term storage, light sensitive assays and robotics. Certified DNase- & RNase- free. Excellent chemical resistance (e.g. DMSO). Universal fit for use with all plate types (e.g. flat-top and raised-rim). The smaller dimensions and rounded corners result in no plate overhang for robotics applications. 2.0mil aluminum minimizes shredding during removal; ideal for cold storage. Conformable foil allows visual verification of seal security around each well. Pierceable with a pipet tip or robotic probe for direct sample recovery. Specially formulated adhesive provides an excellent seal to minimize evaporation, reduce cross-contamination and prevent spillage Removes easily and cleanly from plate surfaces. Features a single end-tab with perforations for ease of handling, application and removal.
SealPlate® ColorTabTM adhesive sealing films consist of 50 µm thickness clear polyester. They minimize evaporation, prevent spillage and contamination between wells, and provide a secure seal for ELISA, EIA, and similar assays. These unique sealing films include a color dot and white writing area on each end tab for plate ID labeling. End tabs with backing removed adhere to the ends of the plate and are perforated so they can be left in place to maintain plate identity even if the center portion of the sealing film is removed.
A 140 µm thick hydrophobic porous rayon sealing film including medical-grade adhesive for tissue culture plates, bio-blocks, and 96-well plates where gas exchange is necessary for cell or bacterial growth. AeraSeal sealing films minimize cross-contamination, spillage and evaporation. They allow uniform air and CO2 exchange for all wells, unlike plate lids which favor exchange for wells near the plate edges.
SealPlate® 50 µm thickness polyester sealing films minimize evaporation, prevent spillage and contamination between wells, and provide a secure seal, not just a cover. Secure sealing of all wells eliminates ""edge effects"" in sensitive ELISA assays. SealPlate sealing films can also be used with tissue-culture plates for short-term storage, incubation, and containment of biohazards.
Large cut is designed for greater coverage; results in a more complete seal around the edges of the plate which can reduce evaporation rates. Large cut allows for easier positioning of the film to the plate via edge of plate alignment vs. centering. 2mil clear polyester film will not tear upon removal. An extra strong, thick adhesive minimizes evaporation and well-to-well contamination. Removes easily and cleanly from plate surfaces. Features two removable end-tabs with perforations for ease of handling, application and removal.
Also useful for protecting contents of plate from contamination during multiple manual reagent additions over time. X-PierceTM sealing films are 89 µm thick vinyl with a 18 µm thick adhesive layer, designed for temporary protection from contamination and evaporation for samples in 96-well plates. A precut ""X"" over each well creates four flaps that easily bend downward when pushed by a robotic probe or pipet tip, allowing sample access without coring or adhesive fouling. A thin adhesive layer and special hairline cuts separating the X-Pierce flaps combine to prevent probes from contacting adhesive and becoming occluded. The flaps return to their original position after sampling for continued protection
Each SealPlate roll contains films to cover 100 microplates.
ThermalSeal RTSTM sealing films are based on 50 µm polyolefin films with 50 µm inert encapsulated silicone adhesive. They are optically clear, with low autofluorescence, and are especially suited for real-time qPCR, storage, and protein crystallization applications. The encapsulated silicone adhesive is non-tacky until pressed against the sealing surface, at which time adhesive is released only in sealing areas to form the strongest available heat-resistant seal around each well on the plate. Adhesive on non-sealing areas of the film, such as directly over sample wells, remains encapsulated and inert. Excel ThermalSeal RTS films are sized to fit within the edges of raised-rim 96-well plates. Their consistent high optical clarity makes possible reproducible, reliable, and consistent DNA amplification measurements and crystal detection. Two end tabs assist in positioning the film on the plate, and the non-tacky adhesive surface simplifies handling. Easy removal of the end tabs at perforated boundaries prevents lifting and higher evaporation rates that can occur with films that overlap the plate rim. Dimensions 78.6 by 139.7 mm. With end tabs removed, length is 113.0 mm.
Excel Scientific's unique SealMate™ system provides a convenient new method for sealing standard-format microplates with adhesive films. The system includes a molded polypropylene dispenser with a hinged “clamshell” design and sealing films supplied in a novel sheeted-roll configuration.
Each AeraSeal roll contains films to cover 50 culture plates.
With a 70 µm polyethylene top layer and inert white polypropylene and acrylic adhesive sublayer, this easy-piercing sealing film allows direct sample recovery with single or multichannel pipettors and robotic probes. The adhesive-free zone above each well prevents adhesive fouling of the pipet tip or probe, ultimately minimizing the amount of adhesive that comes into contact with the sample. Dimensions are 79.4 by 142.9 mm for 96-well plates.
Excel Scientific's unique SealMate™ system provides a convenient new method for sealing standard-format microplates with adhesive films. The system includes a molded polypropylene dispenser with a hinged “clamshell” design and sealing films supplied in a novel sheeted-roll configuration.